Computational studies on optoelectronic and charge transfer properties of some perylene‐based donor‐π‐acceptor systems for dye sensitized solar cell applications

We report DFT studies on some perylene‐based dyes for their electron transfer properties in solar cell applications. The study involves modeling of different donor‐π‐acceptor type sensitizers, with perylene as the donor, furan/pyrrole/thiophene as the π‐bridge and cyanoacrylic group as the acceptor. The effect of different π‐bridges and various substituents on the perylene donor was evaluated in terms of opto‐electronic and photovoltaic parameters such as HOMO‐LUMO energy gap, λ_max, light harvesting efficiency(LHE), electron injection efficiency (Ø_inject), excited state dye potential (E^dye*), reorganization energy(λ), and free energy of dye regeneration (). The effect of various substituents on the dye–I₂ interaction and hence recombination process was also evaluated. We found that the furan‐based dimethylamine derivative exhibits a better balance of the various optical and photovoltaic properties. Finally, we evaluated the overall opto‐electronic and transport parameters of the TiO₂‐dye assembly after anchoring the dyes on the model TiO₂ cluster assembly.     

“禁摩限电”效果综合评价模型

将交通需求级别进行划分后,通过数据包络分析法计算交通需求匹配度和交通运行效率,近乎绝对细化交通运行表现,依据具有时间轴的四维交通状况模拟建立了全新多维度的交通评价体系。此外,利用模糊层次分析法确定道路交通安全评价指标体系中各个指标的权重,同时作出基于差异驱动原理的综合评价。最后,将交通的污染指标提炼为机动车的排放指标和电动车的耗电指标来衡量交通工具对环境的影响。     

Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

This paper numerically explores the possibility of ultrathin layering and high efficiency of graphene as a back surface field (BSF) based on a CdTe solar cell by Personal computer one-dimensional (PC1D) simulation. CdTe solar cells have been characterized and studied by varying the carrier lifetime, doping concentration, thickness, and bandgap of the graphene layer. With simulation results, the highest short-circuit current (I_sc = 2.09 A), power conversion efficiency (η = 15%), and quantum efficiency (QE~85%) were achieved at a carrier lifetime of 1 × 10³ μs and a doping concentration of 1 × 10¹⁷ cm⁻³ of graphene as a BSF layer-based CdTe solar cell. The thickness of the graphene BSF layer (1 μm) was proven the ultrathin, optimal, and obtainable for the fabrication of high-performance CdTe solar cells, confirming the suitability of graphene material as a BSF. This simulation confirmed that a CdTe solar cell with the proposed graphene as the BSF layer might be highly efficient with optimized parameters for fabrication.     

二维超声联合超声造影TIC参数在乳腺导管内病变良/恶性诊断中的应用价值

本研究分析了二维超声(2DUS)联合超声造影(CEUS)时间-强度曲线(TIC)参数在乳腺导管内病变良/恶性鉴别诊断中的应用价值。选取乳腺导管内病变患者81例(共93个病变),均行2DUS及CEUS检查。结果显示,2DUS检出恶性病变17个,良性病变48个,诊断准确度69.89%(65/93)、敏感度53.13%(17/32)、特异度78.69%(48/61),阳性预测值为56.67%(17/30),阴性预测值为76.19%(48/63)。恶性病变达峰时间早于良性病变(P<0.05),峰值强度、曲线上升支斜率、曲线下面积均高于良性病变(P<0.05)。ROC曲线分析结果显示:2DUS联合CEUS-TIC参数鉴别诊断乳腺导管内病变良/恶性的AUC、敏感度、特异度均高于2DUS或CEUS单独检查(P<0.05)。因此可知,对于乳腺导管内病变,2DUS联合CEUS检查可明显提高对良/恶性的鉴别诊断效能。     

锂离子电池硅氧化物负极首次库伦效率的影响因素与提升策略

硅氧化物(SiO_x, 0<x≤2)具有高的比容量和低的嵌锂电位, 且体积膨胀率显著低于纯硅负极, 因而被认为是替代传统石墨负极材料的理想选择之一. 然而SiO_x负极在首次嵌锂过程中表面形成的固体电解质界面膜(SEI)以及大量的不可逆产物, 造成其首次库伦效率偏低, 严重阻碍了SiO_x负极的实际应用. 本文从SiO_x的结构模型出发, 系统阐述了SiO_x负极的嵌锂机理以及首次库伦效率低的原因; 归纳了SiO_x负极首次库伦效率的提升策略及其研究进展; 并对提升SiO_x负极首次库伦效率的未来发展方向进行了展望.     

提高氧化铁光电催化分解水效率的策略进展

为了解决能源危机与环境污染问题,发展一种可再生的清洁能源至关重要.太阳能是一种取之不尽用之不竭的清洁能源,而氢气是一种良好的能源载体.利用太阳能光电催化水分解制氢,是一项有望能够解决能源与环境问题的技术,具有很大的应用前景.其中,氧化铁因为具有合适的能带位置与带隙、良好的稳定性与廉价无毒等优点,成为一种理想的光阳极材料.但是,在实际的测试中,氧化铁仅仅只能得到一个较低的光电转换效率,这可能是因为其较短的空穴扩散距离、较低的电导率以及极度缓慢的水氧化反应动力学所致.整个光电催化水氧化可分为三个过程,即光吸收过程、电荷分离过程以及表面空穴注入过程.这三个过程的效率共同决定了器件的太阳能转化效率.鉴于此,本文将从如何提高这三个效率的角度出发,总结近期研究报道中提高氧化铁光电催化分解水效率的一些策略.光吸收过程是指半导体中价带的电子在吸收具有一定能量的光子后发生跃迁,产生空穴-电子对的过程.其光子的损失主要来源于光的反射、透射以及半导体吸收边的限制.提高光吸收效率的主要策略包括制备具有特定纳米结构的氧化铁电极、利用表面等离子体共振效应以及组成双光吸收系统和掺杂等.电荷分离过程指的是受光激发产生的空穴电子对,在内建电场的作用下发生电荷分离,即光生空穴流向电极表面,光生电子流向半导体内部并从外电路导出.电荷分离效率的损失主要来源于光生载流子在迁移过程中的复合.因此,为了提高电荷分离效率,常见的策略是提高载流子在电荷分离过程中的复合时间τ₁和减少电荷迁移到表面(空穴)或者基底(电子)的时间τ₂.具体的策略包括制备特定的纳米结构(缩短体表相距离,减少τ₂)、构建异质结(增强能带弯曲,提高τ₁和减少τ₂)、掺杂(减少τ₂)和钝化复合中心(提高τ₁)等.表面空穴注入是指到达表面的光生空穴发生水氧化反应生成氧气的过程.除了空穴注入外,表面还可能存在复合与逆反应过程.因此,为了提高表面空穴注入效率,我们既可以提高水氧化反应动力学,具体的手段包括引入水氧化催化剂、F掺杂和碱处理等;也可以采用减少复合反应的策略,具体的方法包括引入钝化层、酸处理和高温热处理等;还可以采用减少逆反应的方法,最常见的手段就是在基底与氧化铁层之间引入电子阻挡层.上述三种途径都能提高表面空穴注入效率.最后,通过结合上述的一些策略,目前得到的最高性能的氧化铁电极在1.23 V(相对于可逆氢电极)能够达到6 mA cm^?2的光电催化分解水电流,但这个值依然明显低于氧化铁的理论值(12.6 mA cm^?2).这可能是由于体相复合所致.除此之外,氧化铁表面的水氧化机理现在依然不清晰,这些都是需要我们在未来解决的问题.     

B改性钒钛催化剂低温NH_3-SCR还原NO_x

选择性催化还原(SCR)技术是降低柴油机NO_x排放的常用技术,其核心部件为催化剂.目前最广泛使用的催化剂为V_2O_5/TiO_2催化剂,但其存在一些缺点,如低温活性不佳、活性温度窗口较窄等.为了解决该催化剂存在的上述一系列问题,我们对V_2O_5/TiO_2催化剂进行改性处理.采用溶胶-凝胶法和浸渍法制备了B改性的V_2O_5/TiO_2催化剂,在标准工况下,在催化剂活性测试平台上对B改性后的催化剂进行活性测试实验,采用XRD、BET和NH_3-TPD对催化剂结构进行表征.实验结果表明B改性能有效增大催化剂的比表面积和孔容,使催化剂表面弱酸量增加,进而表现出较高活性和稳定性.此外,研究了空速、氧气浓度、氨氮比以及SO_2和H_2O(g)对催化剂选择性催化还原NO_x的影响.结果表明,改性催化剂具有较好的抗硫、抗水中毒能力.     

Improvement in the light conversion efficiency of silicon solar cell by spin coating of CuO,ZnO nanoparticles and CuO/ZnO mixed metal nanocomposite material

Synthesis of pure Zinc oxide (ZnO), Copper oxide (CuO) nanoparticles (NPs) and their (ZnO/CuO) nanocomposites (NCs) in 1:1 M ratio were successfully prepared by co-precipitation method. The structural properties of the as synthesized nanoparticles and nanocomposite materials were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) techniques. Optical band-gap studies were done using UV–Visible absorption spectroscopy. Photovoltaic properties of pure ZnO NPs, CuO NPs and ZnO/CuO NCs coated over a single-crystalline silicon solar cell were carried out to compare improvement of light-conversion efficiency in coated solar cell. The maximum light conversion efficiencies were found to be of 8.02% for CuO (3 mg/ml concentration) and 7.28% for ZnO NPs (3 mg/ml concentration), whereas that of mixed metal nanocomposite CuO/ZnO NCs was found to be 7.62%. at very low concentration of 1 mg/ml. This indicates with low concentration of mixed metal NCs an improvement in light efficiency can be obtained. The enhancement in efficiency could be due to formation of p - n heterojunction by CuO/ZnO NCs composites which enhances the number of electrons and holes participating in conduction on the surface.     

聚3-己基噻吩：非富勒烯太阳能电池中的量子效率损失和电压损失

聚3-己基噻吩(P3HT)以其合成工艺简单、成本低廉的优势,成为有机光伏领域中最具吸引力的电子给体材料之一。然而,目前P3HT: 非富勒烯太阳能电池的光伏性能仍然较差。在本工作中,我们证明了与P3HT: 富勒烯太阳能电池相比,较快的电荷转移态的非辐射衰减速率(K_nr)是导致P3HT: 非富勒烯太阳能电池中较低的量子效率和较高的电压损失的原因。然后,我们研究了基于非富勒烯受体ZY-4Cl的太阳能电池的工作机理。研究结果表明与P3HT: 非富勒烯体系相比,P3HT: ZY-4Cl中K_nr的降低改善了器件的量子效率,同时降低了电压损失。K_nr降低的原因可以部分归因于电荷转移态能量的增加。此外,给体分子和受体分子之间的距离(DA间距)的增大也是K_nr减少的重要原因。因此,我们得出结论：为了提高P3HT太阳能电池的性能,需进一步降低器件的K_nr,这可通过增加活性层中的DA间距来实现。     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.